Skip to main content

Upgrade Firmware

Navigation Bar

Preface​

This document describes how to flash firmware from a host PC to the storage of a Rockchip development board via a data cable.

During the upgrade, you need to select the firmware according to your actual requirements and choose the appropriate upgrade method.

Obtaining the Firmware​

  • Note: DC685/DC685-F firmware is compatible at the firmware software level

Link: https://pan.baidu.com/s/1emGeh4Xeg6l4GqPysjtviQ?pwd=fanc Extraction code: fanc

DC685/F Smart Display Public Overseas Firmware​

Qualcomm-DC685-A14-GMJ-Fanconn

Link: https://pan.baidu.com/s/11vCXcYNqTaGWmkaBX-1VbQ?pwd=fanc Extraction code: fanc

Installing the Flashing Tool​

Download the Files​

Download and install the Qualcomm USB driver QUD.WIN.1.1%20Installer-10093.1.zip

Download and install the QPST/QFIL flashing tool qpst.win.2.7_installer_00496.2.rar

Please download the corresponding firmware for your mainboard yourself

Driver​

  • The driver must be installed before flashing, otherwise the host cannot recognize the mainboard

QUD.WIN.1.1%20Installer-10093.1.zip

After extracting, open qualcomm_usb_driver_installer_10057 \ Setup.exe to install the driver

images/QC_Flash_04.png

images/QC_Flash_05.png

Installation completed

Flashing Tool​

qpst.win.2.7_installer_00496.2.rar

Open qualcomm_usb_driver_installer_10057 \ Setup.exe to install the driver

images/QC_Flash_06.png

images/QC_Flash_07.png

images/QC_Flash_08.png

images/QC_Flash_09.png

Installation completed

Starting the Upgrade​

Open the Upgrade Software​

Open Start Menu \ QPST \ QFIL

images/QC_Flash_10.png

Opened


Select the Firmware​

  1. Select Flat Build - Browse ...

  2. Select Fanconn_V1.1.7_DC665_TPJ_UFS_V1.1_20250312120421 \ prog_firehose_ddr.elf and click Open

images/QC_Flash_11.png

Select prog_firehose_ddr.elf

Select Partitions​

  1. Click Load XML ... again, select Fanconn_V1.1.7_DC665_TPJ_UFS_V1.1_20250312120421 \ rawprogram0_update_sparse.xml and click Open

images/QC_Flash_12.png

Select rawprogram0_update_sparse.xml

  1. In the dialog that appears, select Fanconn_V1.1.7_DC665_TPJ_UFS_V1.1_20250312120421 \ patch0.xml and click Open

images/QC_Flash_13.png

Select patch0.xml again

Enter Upgrade Mode​


Mainboard/Device Diagram​

images/QC_Flash_14.png

Wiring diagram

images/QC_Flash_15.png

If the device has a housing, you can press the BOOT button here with a toothpick or similar


Auto Power-on Mainboard Entering Upgrade Mode​

An auto power-on mainboard powers on automatically once connected to power

  1. Connect the USB TYPE-C data cable to the mainboard

  2. Press and hold the Boot button

  3. Connect the DC12V power supply to the mainboard

  4. Release the button after entering boot mode


Manual Power-on Mainboard Entering Upgrade Mode​

For a non-auto power-on mainboard, you need to power it on manually after connecting power

  1. Connect the USB TYPE-C data cable to the mainboard

  2. Connect the DC12V power supply to the mainboard

  3. Press and hold the Boot button

  4. Press and hold the Power button, and release after entering boot mode


adb shell Entering Loader Mode​

When the device is in normal state, you can also enter upgrade mode by entering the following commands directly in adb

# Check whether the device is connected
adb devices
# List of devices attached (list of connected devices)

# Reboot into QDLoader mode
adb reboot edl

If you see error: closed during debugging, it indicates that a password is required to continue debugging

error: closed

# Verify the password
adb shell password
# Reboot into loader mode
adb reboot edl

Enter the password to debug normally. Note that password is not the actual password; contact technical support to obtain the actual password

Note: The password is not publicly released; please contact technical support to obtain it

For details, see

ADB Entering Flashing Mode


Parameter Settings​


Select the Device to Upgrade​

When Please Select an Existing Port is displayed, click Select Port, then select Qualcomm HS- USBQDloader 9008(COM3) and click OK

images/QC_Flash_15.png

Select Qualcomm HS- USBQDloader 9008(COM3)


Select the Device Flash Type​

Refer to the sticker on the back of the mainboard, and finally select Storage Type: - ufs

images/QC_Flash_16.png

Select Storage Type: - ufs


Start the Upgrade​

After confirming that the information is correct

Click Download and wait for the blue progress bar to complete

images/QC_Flash_19.png

Wait for the blue progress bar to reach 100%

When Download Succeed / Finish Download is displayed, the upgrade is complete


Completing the Upgrade​

The upgrade is only successful when blue Succeed is displayed!

Navigation Bar

images/QC_Flash_20.png

Upgrade completed


Automatic Restart After the Upgrade​

Under Configuration - FireHose Configuration - Download Configuration

Check Reset After Download

This means automatically restart after download is complete

Notes​


Wipe Flash Option Erase All Before Download​

Warning

Risk of system software failure!

  • Only for professional personnel to completely wipe/restore an entire device

  • Unless specifically required when flashing the base firmware, do not check Erase All Before Download

  • If it is needed in special cases, immediately uncheck the wipe option after use

images/QC_Flash_17.png

Be careful not to check it by mistake

AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →