Skip to main content

Upgrade Introduction

Navigation bar

Preface​

This document introduces how to flash firmware from a host computer to Qualcomm series development boards. When upgrading, you need to choose the appropriate upgrade method based on the host operating system and firmware type.

If you want to run other operating systems, you need to use the corresponding firmware to flash onto the motherboard.

Generally speaking, unless the hardware is damaged, Qualcomm development boards will not be bricked.

If an accident occurs during the upgrade process and the bootloader is damaged, making it impossible to re-upgrade, you can still enter MaskRom mode to repair it.

Preparation Tools​

  • Qualcomm motherboard/device
  • PC host
  • Functioning data cable

Prepare Firmware​

Download the firmware from the Firmware Download section.

  • Partitioned firmware refers to individual files for each function, such as partition table, bootloader, kernel, etc., generated during the development phase.

    Independent partition images allow updating only specified partitions while keeping data in other partitions intact, which is very convenient for debugging during the development process.

AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →