Skip to main content

Upgrading Firmware

Navigation bar

Preface​

This document describes how to flash firmware into the storage of CAM576-B2B through a USB data cable.

Under Construction

Only the core board part of CAM576-B2B has been adapted so far; the base board is still in design and development, and the firmware is still being adapted, so a complete upgrade process cannot be provided yet. The following are the general upgrade steps for the Rockchip platform, which will be updated after the base board and firmware are released.

Obtaining Firmware​

Building from the SDK​

The SDK is being adapted and is not yet available for download.

Core Board Only, No Firmware Available​

The core board cannot boot on its own; you need to configure the peripherals (base board) and generate the corresponding firmware before upgrading.

Installing the Flashing Tool​

Download the Materials​

Install the RK USB driver Release_DriverAssistant.zip

Run the RK flashing tool RKDevTool_Release_v3.32

Installing the Driver​

  • To ensure all devices use the updated driver, please select Driver Uninstall first, and then install the driver.

Photo Install the driver

Running the Flashing Tool​

Photo Extract the archive and run RKDevTool.exe in the RKDevTool_Release_v3.32 directory (on Windows 7/8, right-click and run as administrator)

Entering Loader Mode​

Entering Loader Mode with a Terminal Command​

After the system boots, enter reboot loader in the adb terminal.

Photo Enter Loader mode

Entering Loader Mode with the BOOT Button​

  1. Disconnect all power
  2. Press and hold the BOOT button (core board J3:7, SARADC_IN0_BOOT)
  3. Connect the USB data cable to power on automatically and enter Loader mode
  4. Release the BOOT button
Note: the BOOT button must be designed on the base board.

Starting the Upgrade​

  • 1-2 Extract the firmware
  • 3 Check and make sure Loader mode is entered
  • 4 Select the extracted firmware
  • 5 Click the upgrade button

Photo Start the upgrade

The upgrade is complete when Download Firmware 100% and Download Firmware Success are displayed.

Photo Upgrade completed

AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →