Upgrade Introduction

Preface
This document describes how to flash firmware from a host PC to a Rockchip platform device. When upgrading, you need to choose the appropriate upgrade method according to the host operating system and the firmware type.
Only the core board part of CAM576-B2B has been adapted so far; the base board is still in design and development. It
Required Tools
- CAM576-B2B core board + base board
- PC host
- A good-quality USB data cable
Preparing Firmware
Firmware can be obtained by compiling the SDK or from the firmware download page. There are generally two types of firmware files:
- Unified firmware: contains all partitions such as the partition table, bootloader, uboot, kernel, and system. Unified firmware is generally used for official releases.
- Partition firmware: individual partition images for each function, used during development so that only the specified partitions can be updated.
Flashing Tools
Drivers
- To ensure all devices use the updated driver, please select
Driver Uninstall first, and then install the driver.
Flashing Tool
Boot Modes
Normal Mode
The normal boot process, in which each component is loaded in sequence and the system starts.
Loader Mode
The bootloader enters the upgrade state and waits for commands from the host; used for firmware upgrade.
MaskRom Mode
When the bootloader is corrupted and a normal upgrade is impossible, you can enter MaskRom mode to repair the device.