Product Description

Feature Summary
CAM576-B2B core board
- Interface type: board-to-board (B2B) connector
- Dimensions: 38 × 38 mm
- Core: RK3576 8nm, 4 × Cortex-A72 + 4 × Cortex-A53, 2.2GHz Max
- NPU: 6 TOPS RKNN
- GPU: ARM Mali-G52 MC3
- Memory: LPDDR4X
- Storage: UFS 2.2
- Power: supplied by the base board (voltage/current TBD), with onboard RK806S-5 PMIC
- System: Linux Buildroot / Debian (in adaptation)
Only the core board part has been adapted so far; the base board is still in design and development, and the materials are still being organized and confirmed. The parameters below come from an interim version of the schematic and may change;
Product Appearance
Front view (38 × 38 mm)

Back view (38 × 38 mm)

CAM576-B2B is a 38 × 38 mm core board, with the RK3576, UFS storage, and PMIC mounted on the top side, and the board-to-board connectors on the bottom side (subject to the final mechanical drawing).
Parameters
CPU:
- Quad-core Cortex-A72 + quad-core Cortex-A53, up to 2.2GHz
- 8nm process
GPU:
- ARM Mali-G52 MC3
NPU:
- 6 TOPS RKNN
Memory:
- LPDDR4X
Storage:
- UFS 2.2
Video:
- 8K30 H.264 / H.265 / VP9 / AV2 / AVS2 Decoder
- 4K60 H.264 / H.265 Encoder
Display (HDMI OUT / eDP):
- HDMI output (the schematic only has HDMI TX, no HDMI IN)
- eDP TX
- MIPI DSI (4-lane)
- RGB / EBC e-paper interface
CSI:
- 16M ISP with HDR (up to 120dB)
- MIPI CSI-2 DPHY / CPHY
- Up to 5 MIPI CSI channels (CSI0 ~ CSI4, some lanes are multiplexed)
Network:
- ETH0 / ETH1 RGMII (the PHY must be provided/determined by the base board)
USB:
- USB3 OTG0 (supports DP Alt Mode)
- USB3 Host1 (multiplexed with PCIe1 / SATA1)
- USB2 OTG0 / USB2 OTG1 / USB2 Host1
- The specific interface configuration is subject to the base board design
High-speed interfaces:
- PCIe0 / SATA0 (multiplexed)
- PCIe1 / SATA1 / USB3 Host1 (multiplexed)
- The specific interface configuration is subject to the base board design
Other interfaces:
- SDMMC0 (4-bit SD card)
- UART / SPI / I2C / PWM / CAN FD / SARADC
- SAI / PDM / SPDIF audio