Skip to main content

Interface Definitions

Navigation Bar

RK3588-AGV provides a rich set of interfaces, as shown below:

Device Interface Definitions​

Front Device interfaces

J1 RTC Battery​

Front

  • CR1220-3V battery

J2 System Fan​

Front

  • Supports a 12V fan

J5 Micro-SIM Card​

Front

  • Micro-SIM card

J8/J9/U3814 Ethernet Switch/USB-A3.0​

Front

Includes:

  • 5 USB-A 3.0 interfaces
  • 3 RJ45 Ethernet switch interfaces

J10 HDMI-OUT​

Front

  • Supports HDMI OUT output

J11 36-PIN Connector​

Front

Pin No.Pin DescriptionRemarks
1VCC_24V 12VPower input
2GND
3GND
4Line-IN_NAudio input
5Line-IN_P
6GND
7GND
8UART2_TX_3V3ttyS2(debug)
9GND
10CAN0LCAN0
11CAN0H
12GND
13RS485_B1ttyS4
14RS485_A1
15GND
16UART6_TX ttyS6
17UART6_RX
18GPIO1_A6gpio38
19RS232_RX1ttyS0
20RS232_TX1
21GND
22RS485_A2ttyS7
23RS485_B2
24GND
25CAN1HCAN1
26CAN1L
27GND
28UART2_RX_3V3ttyS2(debug)
29GND
30SPK_LPAudio output
31SPK_LN
32SPK_RN
33SPK_RP
34GND
35GND
36VCC_24V12V-24V power input

J29 MINI-PCIE​

Front

  • One MINI PCIE slot

J30 Ethernet​

Front

  • Independent Ethernet card (not switch)

SW3/SW1/SW2 Buttons​

Front

  • To upgrade the system, press the SW3 BOOT button and then power on

U3808 M.2 PCIE Interface​

Front

  • Supports M.2 PCIE expansion
AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →