Skip to main content

Upgrade Introduction

Navigation Bar

Preface​

This document describes how to flash firmware from a host PC to Qualcomm series development boards. During the upgrade, you need to choose the appropriate upgrade method based on the host operating system and the firmware type.

If you want to run another operating system, you need to flash the corresponding firmware to the mainboard.

In general, Qualcomm development boards will not be bricked unless the hardware is damaged.

Required Tools​

  • Qualcomm mainboard/device
  • PC host
  • A properly working data cable

Prepare the Firmware​

Download the firmware from the Firmware Download section.

  • Partitioned firmware refers to individual files for each function, such as the partition table, bootloader, and kernel, generated during the development stage.

    Separate partition images allow you to update only the specified partitions while keeping the data in other partitions intact, which makes debugging much easier during development.

AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →