FAQ (Android Common)

FAQ List
1. How do I enable gravity sensing
-
Pull down from the top-left corner of the screen and enable
Auto-rotate screen -
System settings
Settings-Display-Auto-rotate screen(turn the toggle on)
2. The gravity sensing direction is wrong
-
Settings-About-Build number (at the very bottom)-tap 8 times in a row-(developer mode enabled) -
Back-System-Advanced-Developer options -
Acceleration settings (the fifth item)-front/back 0/90/180/270 degrees
- Setting reference:
When the
mainboardand the screen display direction are the same, it isforward(usually: the mainboard is mounted on therear shell)When the
mainboardis opposite to the screen display direction, it isreverse(usually: the mainboard is mounted directly on theback of the screen)
3. The app orientation is wrong
Settings-Display-Force app rotation
4. I do not need the navigation bar, but want it to slide out when needed
-
Settings-Display-Immersive mode (turn the toggle on) -
The navigation bar disappears after
5 secondswithout any operation -
Swipe up from the bottom of the screenand the navigation bar appears
5. I never need the navigation bar
Settings - Display - Navigation bar - On
adb shell setprop persist.sys.fanc.navigationbar.enable 0
6. How do I pair and connect a Bluetooth voice remote control with the device
-
Make sure
batteriesare installed in the remote control -
Stay close to the smart display, within
1 meter -
Open the smart display settings-Connected devices(Bluetooth) -Other devices -
Press and hold the
Home buttonand theMenu buttonon the remote control at the same time until thered light blinks -
Find
Voice Assistantunder other devices on the smart display, tap to connect, and wait untilConnectedis displayed
7. Firmware version number
Settings - About device - Build number
8. I do not need a screensaver
Settings - Display - Screen timeout - Never (select)
9. Factory reset
Settings - System - Reset options - Erase all data (factory reset)
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
10. How do I open Settings
The gear-like button in the upper-right corner of the desktop is the settings button
11. How do I change the wallpaper
Tap the image button next to the gear icon. 10 wallpapers are preinstalled. Select the wallpaper you like and tap confirm
12. How do I tell the configuration size
The label on the back of the mainboard shows the model and configuration
Settings-Storage- (64GB/128GB total)
13. How do I adjust the volume
On the
desktop,swipe up or down on the right sideto bring up thevolume buttons; up increases and down decreases
Settings-Sound(Media volume,slide left or rightto adjust; left is lower, right is higher)
14. How do I turn off touch sounds
Settings - Sound - Touch sounds - (Off)
15. How do I activate the wireless screen casting software
Connect the mainboard to WIFI
Open the
Wireless CastingAPP on the desktopThere are 2-3 icons in the upper-right corner -
enter the activation codeto activateBefore trial activation there are 3: from left to right they are
trial activation,commercial activation, and theWIFI button. Tap the one with thearrow iconandenter the activation codeto activate
16. How do I change to another wallpaper (not preinstalled)
Connect the mainboard to WIFI
Open the "Wireless Casting" APP on the desktop
There are 2-3 icons in the upper-right corner (before trial activation there are 3: from left to right they are trial activation, commercial activation, and the WIFI button). Tap the one with the arrow icon and enter the activation code to activate
17. How do I change the boot animation
18. How do I return to the native Android launcher
Settings-Apps-Default apps
Home app-Fanconn is the default-select Quickstep
19. What should I do if I forget the lock screen password
Restore factory settings with adb
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
20. Checking the number of microphones
cat /proc/asound/cards
21. Common Android system setting properties
# Enable the status bar
adb shell setprop persist.sys.fanc.statusbar.enable 1
# Enable the navigation bar
adb shell setprop persist.sys.fanc.navigationbar.enable 1
# Restart SystemUI to apply the changes
adb shell am restart
# Verify the settings
adb shell getprop persist.sys.fanc.statusbar.enable
22. Forgot password / factory reset
- Use adb commands
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
