Upgrade Firmware

Preface
This document introduces how to flash firmware from a host computer to the memory of a Rockchip development board via a data cable.
When upgrading, you need to select the firmware and the appropriate upgrade method based on actual requirements.
If an accident occurs during the upgrade process and the bootloader is damaged, making it impossible to re-upgrade, you can still enter MaskRom mode to repair it.
Obtaining Firmware
DC695 Android Evaluation Firmware
- Rockchip-DC695-Android-20251226.zip
Link: https://pan.baidu.com/s/1cI2XpRXaXpZ1o9nPBYkM_g?pwd=fanc Extraction code: fanc Copy this content and open the Baidu Netdisk mobile app for a more convenient operation.
Installing Flashing Tools
Download Materials
Install the RK USB driver: Release_DriverAssistant.zip
Run the RK flashing tool: RKDevTool_Release_v3.32
Extract
- Extract
Release_DriverAssistant andRKDevTool_Release_v3.32
Extracting the tools
Install Driver
- To ensure all devices use the updated driver, please select
Driver Uninstall first, and then select Driver Installation.
Installing the driver
Run the Flashing Tool
Extract the archive and run RKDevTool.exe in the RKDevTool_Release_v3.32 directory (Note: For Windows 7/8, right-click and select "Run as administrator").
Entering Loader Mode
There are two ways to enter Loader mode:
Enter Loader Mode via Terminal Command
Enter the command directly in the terminal:
- You can enter
reboot loader after starting the adb terminal.
Entering Loader Mode
Enter MaskRom Mode via BOOT Button
Switch to upgrade mode using the boot button:
- Disconnect all power sources.
- Press and hold the
boot button . - Connect the USB data cable, then connect the power. The device will automatically power on and enter
MaskRom mode . - You can then release the BOOT button.
Press and hold the Boot button while powering on.
Starting the Upgrade
Follow these steps to upgrade Rockchip:
Upgrade Steps
1-2Extract the firmware.3Check to ensure you have entered Loader mode.4Select theimg firmware file extracted in the previous step Obtaining Firmware.5Click the upgrade button.
Starting the Upgrade
Completing the Upgrade
Wait for Download Firmware 100% and Download Firmware Successful to appear, indicating that the upgrade is complete.
Upgrade Completed
Extracting the tools
Installing the driver
Extract the archive and run RKDevTool.exe in the RKDevTool_Release_v3.32 directory (Note: For Windows 7/8, right-click and select "Run as administrator").
Entering Loader Mode
Press and hold the Boot button while powering on.
Starting the Upgrade
Upgrade Completed