Upgrade Firmware

Preface
This document describes how to flash firmware from a host PC to the storage of a Rockchip development board via a data cable.
During the upgrade, you need to select the firmware according to your actual requirements and choose the appropriate upgrade method.
Obtaining the Firmware
All DC690V Download Links
Link: https://pan.baidu.com/s/1RT7bp5B7xY6lRJ9kw7lD_A?pwd=fanc Extraction code: fanc
DC690V Conference Device Public Firmware
Rockchip-DC690V-A14-HYJ-Fanconn
Link: https://pan.baidu.com/s/1niJAd5MgUJ3WJ668BTdNbA?pwd=fanc Extraction code: fanc
DC690V Conference Device Public Overseas Firmware
Rockchip-DC690V-A14-HYJ-GMS
Link: https://pan.baidu.com/s/1BBVRAgldOGajOlMwlSjrOA?pwd=fanc Extraction code: fanc
DC690V Casting Device Public Firmware
Rockchip-DC690V-A14-TPJ-Fanconn
Link: https://pan.baidu.com/s/1HjwRapag0s8INHBFxfYGOg?pwd=fanc Extraction code: fanc
DC690V Debian Public Firmware
Rockchip-DC690V-Linux-Debian-xfce-Fanconn
Link: https://pan.baidu.com/s/1BDXavqOJY-c7WI3oji7uiA?pwd=fanc Extraction code: fanc
-
User: user Password: root
-
User: root Password: fanconn
-
If the password does not work, connect a Type-C data cable to the mainboard and change the password with adb shell.
DC690V Ubuntu22 Public Firmware
Rockchip-DC690V-Linux-Ubuntu22-Gnome-Fanconn
Link: https://pan.baidu.com/s/1POGkip3i4FuO9R3adq6DzA?pwd=fanc Extraction code: fanc
-
User: user Password: root
-
User: root Password: fanconn
-
If the password does not work, connect a Type-C data cable to the mainboard and change the password with adb shell.
Installing the Flashing Tool
Download the Files
Install the RK USB driver Release_DriverAssistant.zip
Run the RK flashing tool RKDevTool_Release_v3.32
Extract
- Extract
Release_DriverAssistant andRKDevTool_Release_v3.32
Extract the tools
Install the Driver
- To ensure that all devices use the updated driver, please select
driver uninstall first, and then select driver installation.
Install the driver
Run the Flashing Tool
Extract and run RKDevTool.exe in the RKDevTool_Release_v3.32 directory (note: on Windows 7/8, right-click and select Run as administrator)
Entering Loader Mode
There are two ways to enter Loader mode:
Entering Loader Mode via Terminal Commands
Enter the command directly in the terminal:
- After the adb terminal starts, you can enter
reboot loader to enter it.
Entering Loader mode
Entering MaskRom Mode via the BOOT Button
Switch to upgrade mode with the boot button:
- Disconnect all power
- Press the
boot button - Connect the USB data cable, then connect power; the device powers on automatically and enters
MaskRom mode - You can then release the BOOT button.
Press and hold the Boot button, then power on
Starting the Upgrade
Follow the steps below to upgrade Rockchip
Upgrade Steps
1-2Extract the firmware3Verify that Loader mode is entered4For the firmware, select theimg firmware extracted in the previous step Obtaining the Firmware5Click the upgrade button
Start the upgrade
Completing the Upgrade
Wait until Firmware downloading 100% and Firmware downloaded successfully are displayed, which means the upgrade is complete.
Upgrade completed
Extract the tools
Install the driver
Extract and run RKDevTool.exe in the RKDevTool_Release_v3.32 directory (note: on Windows 7/8, right-click and select Run as administrator)
Entering Loader mode
Press and hold the Boot button, then power on
Start the upgrade
Upgrade completed