FAQ (DC690H)

FAQ List
1. How do I use the PSON power supply
- Answer: You need a power supply that supports PSON as well as an infrared remote control, etc. Because the 5V supply is designed separately and is only used for the MCU to wake the device and the power supply, the standby power consumption is extremely low.
The last section of the datasheet, 6.21, describes the J5005 terminal
6.21 J5005 : STB Power
Part model: A2001WR-S-6P, SMD 2.5mm socket, off-white, 6PIN, horizontal/gold-plated pins
Use cases:
-
The power board supplies a constant 5V to the mainboard to keep the 3576 powered.
-
When the mainboard powers on, the mainboard PSON outputs 5V, and the power board then outputs 12V to power the baseboard.
-
Therefore PSON should output a high level when powered on, and a low level when powered off (notifying the power board to turn off the 12V output).
3. Linux password
-
User: user Password: root
-
User: root Password: fanconn
-
If the password does not work, connect a Type-C data cable to the mainboard and change the password with adb shell.