Upgrade Introduction

Preface
This document introduces how to flash firmware from a host computer to Rockchip series development boards. When upgrading, you need to choose the appropriate upgrade method based on the host operating system and firmware type.
If you want to run other operating systems, you need to use the corresponding firmware to flash onto the motherboard.
Generally speaking, unless the hardware is damaged, Rockchip development boards will not be bricked.
If an accident occurs during the upgrade process and the bootloader is damaged, making it impossible to re-upgrade, you can still enter MaskRom mode to repair it.
Preparation Tools
- Rockchip motherboard/device
- PC host
- Functioning data cable
Prepare Firmware
Firmware can be obtained by compiling from the SDK or by downloading it from the Firmware Download section. Firmware files generally come in two types:
Single firmware and partitioned firmware. Using a unified firmware unpacking/packing tool, you can unpack a single firmware into multiple partition images, or merge multiple partition images into one single firmware.
-
Single firmware contains multiple partition images. It is a single file packaged and merged from all files such as the partition table, bootloader, uboot, kernel, system, etc.
Officially released firmware uses the single firmware format. Upgrading with single firmware will update the data and partition table of all partitions on the motherboard and erase all data on the motherboard.
-
Partitioned firmware refers to individual files for each function, such as partition table, bootloader, kernel, etc., generated during the development phase.
Independent partition images allow updating only specified partitions while keeping data in other partitions intact, which is very convenient for debugging during the development process.
Flashing Tools
Driver
- To ensure all devices use the updated driver, please select
Driver Uninstall first, and then select Driver Installation.
Installing the driver
Flashing Tool
Extract the archive and run RKDevTool.exe in the RKDevTool_Release_v3.32 directory (Note: For Windows 7/8, right-click and select "Run as administrator").
Upgrade Methods
Rockchip supports upgrading firmware through the following methods:
Using EMMC/UFS to Upgrade Firmware
- Connect the motherboard to the computer via USB and use the upgrading tool to flash the firmware onto the motherboard's EMMC.
LKB1126BP supports upgrading firmware through the following two methods:
Using EMMC to upgrade firmware
Connect the LKB1126BP motherboard to the computer via USB and use the upgrading tool to flash the firmware onto the motherboard's EMMC. Using a MicroSD Card
Use the upgrade card creation tool to make a MicroSD card into an upgrade card. Insert the upgrade card into the motherboard, power it on, and the device will automatically perform the upgrade.
Boot Modes
Normal Mode
Normal mode is the standard boot process. Various components are loaded sequentially, and the system boots normally.
Loader Mode
In Loader mode, the bootloader enters an upgrade state, waiting for commands from the host PC. This mode is used for firmware upgrades, etc.
MaskRom Mode
MaskRom mode is used for system repair when the bootloader software is damaged.
Installing the driver
Extract the archive and run RKDevTool.exe in the RKDevTool_Release_v3.32 directory (Note: For Windows 7/8, right-click and select "Run as administrator").