Frequently Asked Questions (Android General)

FAQ List
1. How to enable gravity sensing
-
Pull down from the top left corner of the screen to enable
Auto-rotate screen -
System Settings
Settings-Display-Auto-rotate screen(Toggle ON)
2. Gravity sensing direction is incorrect
-
Settings-About-Version number (at the bottom)-Tap continuously 8 times-(Developer mode enabled) -
Back-System-Advanced-Developer options -
Accelerator settings (5th item)-Front/Back 0/90/180/270 degrees
- Reference instructions:
When the
motherboardand screen display direction are the same, it isForward(Usually: motherboard installed on theback cover)When the
motherboardand screen display direction are opposite, it isReverse(Usually: motherboard installed directly on theback of the screen)
3. App orientation is incorrect
Settings-Display-Force app rotation
4. Don't need the navigation bar, but want it to appear when needed
-
Settings-Display-Immersive mode (Toggle ON) -
The navigation bar disappears after
5 secondsof no operation. -
Swipe up from the bottom of the screento make the navigation bar reappear.
5. Permanently disable the navigation bar
Settings - Display - Navigation bar - Turn OFF
adb shell setprop persist.sys.fanc.navigationbar.enable 0
6. How to pair and connect a Bluetooth voice remote control to the device
-
Ensure the remote control has
batteriesinstalled. -
Stay close to the companion screen, within
1 meter. -
Open Companion Screen Settings-Connected devices(Bluetooth) -Other devices -
Press and hold both the
Home buttonandMenu buttonon the remote control simultaneously until thered lighton the remote startsflashing. -
Find
Voice Assistantin the Other devices list on the companion screen, click to connect, and wait until it showsConnected.
7. Firmware version number
Settings - About device - Version number
8. Disable screensaver
Settings - Display - Screen timeout - Never (select)
9. Factory reset
Settings - System - Reset options - Erase all data (factory reset)
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
10. How to open Settings
The button that looks like a gear in the top right corner of the desktop is the Settings button.
11. How to change the wallpaper
Click the picture button next to the gear. There are 10 pre-installed wallpapers available. Select your preferred wallpaper and click Confirm.
12. How to distinguish storage size
The label on the back of the motherboard specifies the model and configuration.
Settings-Storage- (Total 64GB/128GB)
13. How to adjust the volume
On the
desktop screen,swipe up or down on the right sideto bring up thevolume controls. Swipe up to increase, down to decrease.
Settings-Sounds and vibration(Media volume, adjust byswiping left or right. Left is lower, right is higher.)
14. How to disable touch sounds
Settings - Sounds and vibration - Touch sounds - (Toggle OFF)
15. How to activate the wireless display software
Connect the motherboard to Wi-Fi.
Open the
Wireless Displayapp on the desktop.There are 2-3 icons in the top right corner - Enter the activation code to activate.
Before trial activation, there are 3 icons. From left to right, they are
Trial Activation,Commercial Activation, andWi-Fi Button. Click the icon with thearrow,enter the activation codeto activate.
16. How to change to other wallpapers (not pre-installed)
Connect the motherboard to Wi-Fi.
Open the "Wireless Display" APP on the desktop.
There are 2-3 icons in the upper right corner (before trial activation there are 3, from left to right: Trial Activation, Commercial Activation, Wi-Fi Button). Click the icon with the arrow, enter the activation code to activate.
17. How to change the boot animation
18. How to return to the Android native desktop
Settings-Apps-Default apps
Home app-Default is Fanconn-Select Quickstep
19. What to do if you forget the lock screen password
Factory reset via adb
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
20. Check the number of microphones
cat /proc/asound/cards
21. General Android system settings properties
# Enable status bar
adb shell setprop persist.sys.fanc.statusbar.enable 1
# Enable navigation bar
adb shell setprop persist.sys.fanc.navigationbar.enable 1
# Restart SystemUI to apply changes
adb shell am restart
# Verify settings
adb shell getprop persist.sys.fanc.statusbar.enable
22. Forgot password / Factory reset
- Using adb command
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
