Skip to main content

Frequently Asked Questions (Android General)

Navigation bar


FAQ List​

1. How to enable gravity sensing​

  1. Pull down from the top left corner of the screen to enable Auto-rotate screen

  2. System Settings

Settings - Display - Auto-rotate screen (Toggle ON)


2. Gravity sensing direction is incorrect​

  1. Settings - About - Version number (at the bottom) - Tap continuously 8 times - (Developer mode enabled)

  2. Back - System - Advanced - Developer options

  3. Accelerator settings (5th item) - Front/Back 0/90/180/270 degrees

  • Reference instructions:

When the motherboard and screen display direction are the same, it is Forward (Usually: motherboard installed on the back cover)

When the motherboard and screen display direction are opposite, it is Reverse (Usually: motherboard installed directly on the back of the screen)

3. App orientation is incorrect​

Settings - Display - Force app rotation


4. Don't need the navigation bar, but want it to appear when needed​

  1. Settings - Display - Immersive mode (Toggle ON)

  2. The navigation bar disappears after 5 seconds of no operation.

  3. Swipe up from the bottom of the screen to make the navigation bar reappear.


5. Permanently disable the navigation bar​

Settings - Display - Navigation bar - Turn OFF

adb shell setprop persist.sys.fanc.navigationbar.enable 0


6. How to pair and connect a Bluetooth voice remote control to the device​

  1. Ensure the remote control has batteries installed.

  2. Stay close to the companion screen, within 1 meter.

  3. Open Companion Screen Settings - Connected devices (Bluetooth) - Other devices

  4. Press and hold both the Home button and Menu button on the remote control simultaneously until the red light on the remote starts flashing.

  5. Find Voice Assistant in the Other devices list on the companion screen, click to connect, and wait until it shows Connected.


7. Firmware version number​

Settings - About device - Version number


8. Disable screensaver​

Settings - Display - Screen timeout - Never (select)


9. Factory reset​

Settings - System - Reset options - Erase all data (factory reset)

adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

10. How to open Settings​

The button that looks like a gear in the top right corner of the desktop is the Settings button.


11. How to change the wallpaper​

Click the picture button next to the gear. There are 10 pre-installed wallpapers available. Select your preferred wallpaper and click Confirm.


12. How to distinguish storage size​

  1. The label on the back of the motherboard specifies the model and configuration.

  2. Settings - Storage - (Total 64GB/128GB)


13. How to adjust the volume​

  1. On the desktop screen, swipe up or down on the right side to bring up the volume controls. Swipe up to increase, down to decrease.

  2. Settings - Sounds and vibration (Media volume, adjust by swiping left or right. Left is lower, right is higher.)


14. How to disable touch sounds​

Settings - Sounds and vibration - Touch sounds - (Toggle OFF)


15. How to activate the wireless display software​

  1. Connect the motherboard to Wi-Fi.

  2. Open the Wireless Display app on the desktop.

  3. There are 2-3 icons in the top right corner - Enter the activation code to activate.

Before trial activation, there are 3 icons. From left to right, they are Trial Activation, Commercial Activation, and Wi-Fi Button. Click the icon with the arrow, enter the activation code to activate.


16. How to change to other wallpapers (not pre-installed)​

  1. Connect the motherboard to Wi-Fi.

  2. Open the "Wireless Display" APP on the desktop.

  3. There are 2-3 icons in the upper right corner (before trial activation there are 3, from left to right: Trial Activation, Commercial Activation, Wi-Fi Button). Click the icon with the arrow, enter the activation code to activate.


17. How to change the boot animation​


18. How to return to the Android native desktop​

Settings - Apps - Default apps

Home app - Default is Fanconn - Select Quickstep

19. What to do if you forget the lock screen password​

Factory reset via adb

adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

20. Check the number of microphones​

cat /proc/asound/cards

21. General Android system settings properties​

# Enable status bar
adb shell setprop persist.sys.fanc.statusbar.enable 1
# Enable navigation bar
adb shell setprop persist.sys.fanc.navigationbar.enable 1

# Restart SystemUI to apply changes
adb shell am restart

# Verify settings
adb shell getprop persist.sys.fanc.statusbar.enable

22. Forgot password / Factory reset​

  • Using adb command
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

Image


AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →