Skip to main content

FAQ (DC665-E)

Navigation Bar


FAQ List​

1. Backlight power supply​

  • Note that when the screen is larger than 27 inches, the backlight current will exceed 3A, exceeding the power supply capability of the mainboard. It is recommended to supply 12V power to the backlight separately

2. How do I enable/disable auto power-on for DC665/DC685?​

You need to add or remove the 0Ω resistor R170 on the back. During the debugging stage only, it can be replaced directly with solder or copper wire

R170 ResistorStatusResistance
PresentAuto power-on when powered0Ω
AbsentNo auto power-onNone

Image

Location of R170

AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →