Skip to main content

Adjust Screen Parameters via USB Drive

Navigation bar


Direct Debugging​

If the screen displays abnormally, you can refresh it using a FAT32 USB drive.

Simply go to Downloads to download the screen parameter file and write it to a FAT32 USB drive.

If the USB drive is not recognized, plug it into the device directly: Settings - Device - Storage, and format it as prompted.

DC685F Downloads - 05.Tutorials / Switch screen parameters via USB drive


LVDS Screen Parameter Tuning​

Edit the LVDS screen parameters as needed.

...

lvds,data_format = 0; //Format 0:VESA 1:JEIDA
lvds,port_swap = 0; //Odd/even 0:Swap 1:disabled
dsi,format = 0; //Bit depth 0:8-bit 1:6-bit
pwm,polarity = 0; //Polarity

...
ParameterValueFunctionEffect
lvds,data_format0JEIDAAbnormal screen colors
lvds,data_format1VESAAbnormal screen colors
lvds,port_swap01Stripes on the screen
lvds,port_swap10Stripes on the screen
dsi,format0DEPTH_6BITColor deviation on the screen
dsi,format1DEPTH_8BITColor deviation on the screen
pwm,polarity0Polarity invertedBrightness decreases when raised
pwm,polarity1Polarity invertedBrightness decreases when raised

Note:

  1. The screen goes black after the FAT32 USB drive is inserted; restart the device for the changes to take effect.

  2. Do not adjust anything when the display is working properly.


Image


AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →