Skip to main content

Frequently Asked Questions (Android Common)

Navigation bar


FAQ List​

1. How to enable the gravity sensor (auto-rotate)​

  1. Swipe down from the top left corner of the screen and turn on Auto-rotate screen.
  2. Or via System Settings:

Settings -> Display -> Auto-rotate screen (Toggle ON)


2. Incorrect gravity sensor orientation​

  1. Settings -> About -> Tap Build number (at the very bottom) 8 times -> (Developer options are now enabled).
  2. Go back -> System -> Advanced -> Developer options.
  3. Auto-rotate calibration (5th item) -> Adjust to 0/90/180/270 degrees front/back.
  • Reference notes for settings:

When the mainboard and screen display orientation are the same = Normal (Typically: Mainboard installed in the back cover).

When the mainboard and screen display orientation are opposite = Reverse (Typically: Mainboard installed directly on the back of the screen).

3. Incorrect app orientation​

Settings -> Display -> Force activities to be resizable


4. Hide navigation bar, but accessible when needed​

  1. Settings -> Display -> Immersive mode (Toggle ON).
  2. The navigation bar will disappear after 5 seconds of inactivity.
  3. Swipe up from the bottom of the screen to bring the navigation bar back.

5. Permanently disable navigation bar​

Settings -> Display -> Navigation bar -> Open

adb shell setprop persist.sys.fanc.navigationbar.enable 0


6. How to pair a Bluetooth voice remote control with the device​

  1. Ensure the remote control has batteries installed.
  2. Stay within 1 meter of the "Ji You Ji" (device).
  3. Open "Ji You Ji" Settings -> Connected devices (Bluetooth) -> Pair new device.
  4. Simultaneously press and hold the remote's Home button and Menu button until the remote's red light flashes.
  5. In the "Ji You Ji's" list of other devices, find Voice assistant, click to connect, and wait until it shows Connected.

7. Firmware version number​

Settings -> About device -> Build number


8. Disable screen saver / sleep mode​

Settings -> Display -> Screen timeout -> Select Never


9. Factory reset​

Settings -> System -> Reset options -> Erase all data (factory reset)

adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

10. How to open Settings​

The icon in the top right corner of the desktop that looks like a gear is the Settings button.


11. How to change the wallpaper​

Click the Picture button next to the gear. 10 preset wallpapers are available. Select your preferred wallpaper and click Confirm.


12. How to identify the storage size configuration​

  1. The label on the back of the mainboard indicates the model and configuration.
  2. Settings -> Storage -> (Shows Total space 64GB/128GB)

13. How to adjust the volume​

  1. On the home screen, swipe up or down on the right edge to bring up the volume controls (up to increase, down to decrease).
  2. Settings -> Sound -> Volume (Media volume adjusted via slider, left for lower, right for higher).

14. How to disable touch sounds​

Settings -> Sound -> Other sounds and vibrations -> Touch sounds -> (Toggle OFF)


15. How to activate the wireless screencast software​

  1. Connect the mainboard to WIFI.
  2. Open the Wireless Display app on the desktop.
  3. There are 2-3 icons in the top right corner. Click the icon with the arrow, enter the activation code to activate.

Before activation, there are usually 3 icons: Trial Activation, Commercial Activation, and the WIFI button. Click the one with the arrow icon.


16. How to change to other wallpapers (non-preset)​

  1. Connect the mainboard to WIFI.
  2. Open the "Wireless Display" app on the desktop.
  3. There are 2-3 icons in the top right corner. Click the icon with the arrow, enter the activation code to activate.

17. How to change the boot animation​


18. How to return to the stock Android launcher​

Settings -> Apps -> Default apps

Home app -> Default is Fanconn -> Select Quickstep

19. How to handle a forgotten lock screen password​

ADB factory reset command

adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

20. Check the number of microphones​

cat /proc/asound/cards

21. Set common Android system properties​

# Enable status bar
adb shell setprop persist.sys.fanc.statusbar.enable 1
# Enable navigation bar
adb shell setprop persist.sys.fanc.navigationbar.enable 1

# Restart SystemUI to apply changes
adb shell am restart

# Verify settings
adb shell getprop persist.sys.fanc.statusbar.enable

22. Forgotten password / Factory reset​

  • Using ADB command
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

Image


AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →