Skip to main content

FAQ (Android Common)

Navigation Bar


FAQ List​

1. How do I enable gravity sensing​

  1. Pull down from the top-left corner of the screen and enable Auto-rotate screen

  2. System settings

Settings - Display - Auto-rotate screen (turn the toggle on)


2. The gravity sensing direction is wrong​

  1. Settings - About - Build number (at the very bottom) - tap 8 times in a row - (developer mode enabled)

  2. Back - System - Advanced - Developer options

  3. Acceleration settings (the fifth item) - front/back 0/90/180/270 degrees

  • Setting reference:

When the mainboard and the screen display direction are the same, it is forward (usually: the mainboard is mounted on the rear shell)

When the mainboard is opposite to the screen display direction, it is reverse (usually: the mainboard is mounted directly on the back of the screen)

3. The app orientation is wrong​

Settings - Display - Force app rotation


4. I do not need the navigation bar, but want it to slide out when needed​

  1. Settings - Display - Immersive mode (turn the toggle on)

  2. The navigation bar disappears after 5 seconds without any operation

  3. Swipe up from the bottom of the screen and the navigation bar appears


5. I never need the navigation bar​

Settings - Display - Navigation bar - On

adb shell setprop persist.sys.fanc.navigationbar.enable 0


6. How do I pair and connect a Bluetooth voice remote control with the device​

  1. Make sure batteries are installed in the remote control

  2. Stay close to the smart display, within 1 meter

  3. Open the smart display settings - Connected devices (Bluetooth) - Other devices

  4. Press and hold the Home button and the Menu button on the remote control at the same time until the red light blinks

  5. Find Voice Assistant under other devices on the smart display, tap to connect, and wait until Connected is displayed


7. Firmware version number​

Settings - About device - Build number


8. I do not need a screensaver​

Settings - Display - Screen timeout - Never (select)


9. Factory reset​

Settings - System - Reset options - Erase all data (factory reset)

adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

10. How do I open Settings​

The gear-like button in the upper-right corner of the desktop is the settings button


11. How do I change the wallpaper​

Tap the image button next to the gear icon. 10 wallpapers are preinstalled. Select the wallpaper you like and tap confirm


12. How do I tell the configuration size​

  1. The label on the back of the mainboard shows the model and configuration

  2. Settings - Storage - (64GB/128GB total)


13. How do I adjust the volume​

  1. On the desktop, swipe up or down on the right side to bring up the volume buttons; up increases and down decreases

  2. Settings - Sound (Media volume, slide left or right to adjust; left is lower, right is higher)


14. How do I turn off touch sounds​

Settings - Sound - Touch sounds - (Off)


15. How do I activate the wireless screen casting software​

  1. Connect the mainboard to WIFI

  2. Open the Wireless Casting APP on the desktop

  3. There are 2-3 icons in the upper-right corner - enter the activation code to activate

Before trial activation there are 3: from left to right they are trial activation, commercial activation, and the WIFI button. Tap the one with the arrow icon and enter the activation code to activate


16. How do I change to another wallpaper (not preinstalled)​

  1. Connect the mainboard to WIFI

  2. Open the "Wireless Casting" APP on the desktop

  3. There are 2-3 icons in the upper-right corner (before trial activation there are 3: from left to right they are trial activation, commercial activation, and the WIFI button). Tap the one with the arrow icon and enter the activation code to activate


17. How do I change the boot animation​


18. How do I return to the native Android launcher​

Settings - Apps - Default apps

Home app - Fanconn is the default - select Quickstep

19. What should I do if I forget the lock screen password​

Restore factory settings with adb

adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

20. Checking the number of microphones​

cat /proc/asound/cards

21. Common Android system setting properties​

# Enable the status bar
adb shell setprop persist.sys.fanc.statusbar.enable 1
# Enable the navigation bar
adb shell setprop persist.sys.fanc.navigationbar.enable 1

# Restart SystemUI to apply the changes
adb shell am restart

# Verify the settings
adb shell getprop persist.sys.fanc.statusbar.enable

22. Forgot password / factory reset​

  • Use adb commands
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver

Image


AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →