Skip to main content

Upgrade Firmware

Navigation bar

Introduction​

This document describes how to flash firmware from a host PC to the storage of a Rockchip development board through a data cable.

During the upgrade, select the firmware and the appropriate upgrade method according to your actual needs.

Firmware Download​

Core Board Only, No Firmware​

A core board cannot boot by itself; peripherals must be configured and firmware must be generated.

Install the Flashing Tool​

Download Materials​

Install the RK USB driver Release_DriverAssistant.zip

Run the RK flashing tool RKDevTool_Release_v3.32

Extract​

  • Extract Release_DriverAssistant and RKDevTool_Release_v3.32

Photo Extract the tools

Install the Driver​

  • To ensure all devices use the latest driver, first select Driver Uninstall, and then select driver installation.

Photo Install the driver

Run the Flashing Tool​

Photo Extract the archive and run RKDevTool.exe inside the RKDevTool_Release_v3.32 directory (note: on Windows 7/8, right-click and choose "Run as administrator")

Enter Loader Mode​

There are two ways to enter Loader mode:

Enter Loader Mode via Terminal Command​

Type the command directly in the terminal:

  • After the adb terminal is ready, enter reboot loader.

Photo Enter Loader mode

Enter Loader Mode via the BOOT Button​

Switch to upgrade mode with the boot button:

  1. Disconnect all power.
  2. Press and hold the boot button.
  3. Connect the USB data cable; the device powers on automatically and enters loader mode.
  4. You can now release the BOOT button.
Note: The button must be designed by yourself.

Start Upgrading​

Follow the steps below to upgrade Rockchip.

Upgrade Steps​

  • 1-2 Extract the firmware
  • 3 Check and make sure the device has entered Loader mode
  • 4 Select the firmware extracted in steps 1-2
  • 5 Click the Upgrade button

Photo Start upgrading

Complete the Upgrade​

Wait until Download Firmware 100% and Download Firmware Successful are displayed, which means the upgrade is complete.

Photo Upgrade complete

AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →