Product Specifications

Key Features
DL562 smart module
- Package: LCC + LGA 447-pin
- Dimensions: 43.0 mm × 44.0 mm × 2.90 mm
- Weight: approx. 11.6 g
- Core: Rockchip RK3562, 4 × Cortex-A53, up to 2.0 GHz
- GPU: ARM Mali-G52
- NPU: 1 TOPS, RKNN supported
- ISP: 13 MP ISP with HDR support
- Memory / storage: LPDDR4x + eMMC (see capacity table below)
Interface Resources
| Item | Specification |
|---|---|
| WLAN / Bluetooth | No onboard wireless; external Wi-Fi / Bluetooth via SDIO / UART |
| RGMII | 1 group (external gigabit PHY required) |
| RMII | Up to 2 groups (external 100M PHY required) |
| UART | Up to 10 groups, up to 4 Mbps |
| PCIe | 1 × Gen2 1-lane, RC only |
| USB | USB0: USB 3.0 / 2.0 OTG; USB1: USB 2.0 HOST |
| SDIO | Up to 2 groups |
| I2C | Up to 5 groups |
| SPI | Up to 3 groups, master / slave modes |
| I2S | Up to 3 groups |
| PWM | Up to 16 channels |
| CAN | Up to 2 groups |
| ADC | 13 general-purpose ADC channels |
| GPIO | Up to 86 pins |
Specifications
CPU:
- Quad-core 64-bit ARM Cortex-A53, up to 2.0 GHz
GPU:
- ARM Mali-G52
NPU:
- 1 TOPS, RKNN model inference supported
ISP:
- 13 MP ISP with HDR support
Memory / storage:
- Commercial grade: LPDDR4x 2 GB + eMMC 32 GB by default; 1 GB + 8 GB, 4 GB + 32 GB and 4 GB + 64 GB optional
- Industrial grade: LPDDR4x 2 GB + eMMC 16 GB by default; 1 GB + 8 GB and 4 GB + 32 GB optional
Display:
- 1 × 4-lane MIPI DSI (1.2), up to 2048 × 1080 @ 60 Hz
- 1 × LVDS (multiplexed with MIPI DSI), up to 1280 × 800 @ 60 Hz
- 1 × RGB, up to 2048 × 1080 @ 60 Hz
- 1 × BT.656 / BT.1120
- Dual-display simultaneous output supported
Camera:
- 2 × 4-lane MIPI CSI, splittable into 4 × 2-lane
- Up to 2.5 Gbps/lane, up to 13 MP
- Supports DVP (BT.656 / BT.1120) analog cameras
Video codec:
- Decoding: H.264 up to 1080p @ 60 fps; H.265 up to 4096 × 2304 @ 30 fps
- Encoding: H.264 up to 1080p @ 60 fps
Network:
- Gigabit Ethernet: 1 × RGMII (external PHY required)
- Fast Ethernet: up to 2 × RMII (external PHY required)
- Wi-Fi / Bluetooth: no onboard wireless; external modules via SDIO / UART
USB / PCIe:
- USB0: USB 3.0 / 2.0, OTG only, multiplexed with PCIe, usable for firmware upgrade
- USB1: USB 2.0, HOST only
- PCIe: 1 × 1-lane Gen2, RC mode only
Other interfaces:
- SD card: 1 × SD 3.0
- UART: debug UART default 115200 bps; debug UART and UART9 use 1.8 V levels
- I2C: up to 5 groups, master mode only, 1.8 V levels, up to 400 kbps
- SPI: up to 3 groups
- CAN: CAN0 (3.3 V domain), CAN1 (1.8 V domain)
- ADC: 13 general-purpose ADC channels
- PDM: up to 4 channels, up to 192 kHz
- Audio: 1 speaker output, 1 headphone output, analog microphone input, digital audio
- Keys: PWRKEY / RESET_N / VOL_UP / VOL_DOWN / EDL
- RTC: supported
Electrical and temperature:
- Supply voltage: VBAT 3.3 ~ 3.5 V, typical 3.4 V; the power supply must provide at least 3 A
- Module power outputs: 3.3 V (VCC_PMUIO0), 1.8 V (BUCK5_1V8 / LDO9_1V8), etc.
- Operating temperature: commercial -25 ~ +75 ℃, industrial -40 ~ +85 ℃
- Sleep current: approx. 3.09 mA (commercial, 2 GB + 32 GB)
- Certification: planned
- RoHS: EU RoHS compliant