Skip to main content

SDK Releases

Navigation bar

A general-purpose SDK based on Rockchip RK3562 to help you build your own Linux / Android firmware.


Basic Information​

Supported Systems​

SystemKernelNotes
Linux5.10Default release, actively maintained
Android 135.10Planned

How to Obtain the SDK​

Info

The DL562 SDK has not been publicly released yet. Contact Fanconn technical support for SDK or firmware support.

Build Environment​

  • 64-bit Linux host
  • 16 GB RAM or more recommended; reserve at least 200 GB of disk space

Carrier Board Development​

DL562 is an LCC + LGA 447-pin module and requires a carrier board of your own design. Before designing the carrier board, obtain:

  • "DL562 Hardware Design Manual"
  • "DL562 Pin Assignment and Pin Description"
  • DL562 reference schematic and PCB

The reference design is provided as an example only; perform independent evaluation and verification against your actual product before mass production.


Image


AI Translation Notice

This page was translated into English by AI and is provided for reference only. The original document is written in Chinese. If there is any discrepancy, the Chinese version prevails.

本页英文内容由 AI 自动翻译生成,仅供参考;原文为中文,如有差异请以中文原文为准。

查看中文原文 / View the Chinese original →