Upgrade Firmware

Introduction
This document describes how to flash firmware from a host PC to the storage of a Rockchip development board via a data cable.
During an upgrade, you need to select the firmware according to your actual needs and choose an appropriate upgrade method.
Obtaining Firmware
Conference Device Public System
- Rockchip-DC690V-A14-HYJ-Fanconn
File shared via Netdisk:
Link: https://pan.baidu.com/s/1Z1nJ6rAHz6llZHC_-X5mwA?pwd=fanc
Access code: fanc Copy this message and open the Baidu Netdisk mobile app for a more convenient experience
Conference Device Overseas Public System (with GMS)
Please note:
File shared via Netdisk:
Link: https://pan.baidu.com/s/1ioUXGo1ToNScAnQAfhlHfQ?pwd=fanc
Access code: fanc Copy this message and open the Baidu Netdisk mobile app for a more convenient experience
Casting Device Public System
- Rockchip-DC690V-A14-TPJ-Fanconn
File shared via Netdisk:
Link: https://pan.baidu.com/s/1JpVPoZyt2DyX8L0Dvm7OiQ?pwd=fanc
Access code: fanc Copy this message and open the Baidu Netdisk mobile app for a more convenient experience
Linux Debian Public System
- Rockchip-DC690V-Linux-Debian-xfce-Fanconn
File shared via Netdisk:
Link: https://pan.baidu.com/s/1yGO2jzHxMwVk51WZqqo3og?pwd=fanc
Access code: fanc Copy this message and open the Baidu Netdisk mobile app for a more convenient experience
Linux Ubuntu22 Public System
- Rockchip-DC690V-Linux-Ubuntu22-Gnome-Fanconn
File shared via Netdisk:
Link: https://pan.baidu.com/s/1cT_pQrlVC4DxsjsOYFfI6g?pwd=fanc
Access code: fanc Copy this message and open the Baidu Netdisk mobile app for a more convenient experience
Installing the Flashing Tool
Download the Files
Install the RK USB driver Release_DriverAssistant.zip
Run the RK flashing tool RKDevTool_Release_v3.32
Extract
- Extract
Release_DriverAssistant andRKDevTool_Release_v3.32
Extract the tools
Install the Driver
- To make all devices use the updated driver, please first select
Driver Uninstall , and then select driver installation.
Install the driver
Run the Flashing Tool
Extract and run RKDevTool.exe from the RKDevTool_Release_v3.32 directory (note: on Windows 7/8, right-click and select "Run as administrator")
Entering Loader Mode
There are two ways to enter Loader mode:
Entering Loader Mode via Terminal Command
Enter the command directly in the terminal:
- After the adb terminal starts, you can enter
reboot loader to enter it.
Enter Loader mode
Entering MaskRom Mode via the BOOT Button
Switch the upgrade mode with the boot button:
- Disconnect all power
- Press and hold the
boot button - Connect the USB data cable, then connect the power; the device will boot automatically into
MaskRom mode - You can then release the BOOT button.
![]()
Press and hold the Boot button, then power on
Starting the Upgrade
Follow the steps below to upgrade Rockchip
Upgrade Steps
1-2Extract the firmware3Check and make sure you have entered Loader mode4For the firmware, select theimg firmware extracted in the previous step Obtaining Firmware5Click the upgrade button
Start the upgrade
Completing the Upgrade
Wait until Downloading firmware 100% is displayed and Downloading firmware succeeded, which means the upgrade is complete.
Upgrade complete
Extract the tools
Install the driver
Extract and run RKDevTool.exe from the RKDevTool_Release_v3.32 directory (note: on Windows 7/8, right-click and select "Run as administrator")
Enter Loader mode
Press and hold the Boot button, then power on
Start the upgrade
Upgrade complete