Interface Definition

The DC690V provides a rich set of interfaces, as shown below:
Device Interface Definitions
The DC690V AIBOX has a new appearance and dimensions! The interface functionality is unchanged!
Front / Back / Expansion

Device interfaces - Front
Device interfaces - Back
J1 Power
Interface Definition
- Supports
12V DC IN DC5525, center positive, outer negative
Measured Power
-
Test method:
-
Flash the default
Androidfirmware -
Power on normally, unlock the screen and perform no other operations
-
Only the mainboard power supply is measured; the backlight is not connected.
-
| Status | Voltage | Current | Power | Remarks |
|---|---|---|---|---|
| Booted normally without a screen connected | 12.4V | 0.2-0.3A | Standby 3.6-4.2W | Measurement accuracy 0.1 |
J3 TYPE-C Full-Featured Port
- Full-featured TYPE-C port: supports DP output and USB3.0 OTG.
J5/J6 USB-A 3.0 Ports
- Supports 2 USB-A 3.0 standard ports
J8 TF-Card Slot
Measured maximum 256G; theoretically supports 512G
J10 HDMI-IN/OUT Video Input/Output
- 1xHDMI IN: supports 19201080@60/38402160@30
- 1xHDMI OUT: supports 19201080@60/38402160@30
J15 Ethernet Port
- Auto-negotiating Gigabit Ethernet, supports 10/100/1000Mbps auto-negotiation
J16 3.5MM Headphone Jack
3.5MM jack: US standard (CTIA)
J17 3.5MM Microphone Jack
3.5MM jack: shared in parallel with MIC2
SW1 Boot Upgrade Button
Press and hold to enter
Device interfaces - Front
Device interfaces - Back