FAQ (Android General)

FAQ List
1. How to enable gravity sensing
-
Pull down from the top-left corner of the screen to enable
Auto-rotate screen -
System settings
Settings-Display-Auto-rotate screen(toggle on)
2. The gravity sensing direction is wrong
-
Settings-About-Build number (at the very bottom)-tap 8 times in a row-(Developer mode enabled) -
Back-System-Advanced-Developer options -
Accelerometer settings (the fifth item)-Front/back 0/90/180/270 degrees
- Reference notes for the setting:
When the
mainboardand the screen display direction are the same, this isforward(usually: the mainboard is installed on therear cover)When the
mainboardand the screen display direction are opposite, this isreverse(usually: the mainboard is installed directly on theback of the screen)
3. The app orientation is wrong
Settings-Display-Force app rotation
4. I don't need the navigation bar, but I want to be able to swipe it out when needed
-
Settings-Display-Immersive mode (toggle on) -
With no operation, the navigation bar disappears after
5 seconds -
Swipe up from the bottom of the screenand the navigation bar appears
5. I never need the navigation bar
Settings - Display - Navigation bar - On
adb shell setprop persist.sys.fanc.navigationbar.enable 0
6. How to pair and connect a Bluetooth voice remote control with the device
-
Make sure the remote control has
batteriesinstalled -
Move close to the Companion Screen, keeping a distance of
within 1 meter -
Open the Companion Screen settings-Connected devices(Bluetooth) -Other devices -
Press and hold the remote control's
Home buttonandMenu buttonat the same time until the remote control'sred light blinks -
Find
Voice Assistantin the Companion Screen's other devices and tap to connect; wait untilConnectedis displayed and you are done
7. Firmware version number
Settings - About device - Build number
8. I don't need a screensaver
Settings - Display - Screen timeout - Never (select)
9. Restore factory settings
Settings - System - Reset options - Erase all data (factory reset)
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
10. How to open settings
The gear-like button in the top-right corner of the desktop is the settings button
11. How to change the wallpaper
Tap the image button next to the gear; 10 wallpapers are preinstalled for you to set. Select the wallpaper you like and tap Confirm
12. How to tell the configuration capacity
The label on the back of the mainboard indicates the model and configuration
Settings-Storage- (64GB/128GB in total)
13. How to adjust the volume
On the desktop,swipe up or down on the right sideto bring up thevolume buttons; up increases and down decreases
Settings-Sound(Media volume,swipe left or rightto adjust; left is lower and right is higher)
14. How to turn off the touch sound
Settings - Sound - Touch sounds - (Off)
15. How to activate the wireless casting software
Connect the mainboard to Wi-Fi
Open the
Wireless Castingapp on the desktopThere are 2-3 icons in the top-right corner -
enter the activation codeto activateBefore the trial activation, there are 3: from left to right they are
Trial activation.Commercial activation.Wi-Fi button. Tap the one with thearrow iconandenter the activation codeto activate
16. How to change to other wallpapers (not preinstalled)
Connect the mainboard to Wi-Fi
Open the "Wireless Casting" app on the desktop
There are 2-3 icons in the top-right corner (before the trial activation there are 3: from left to right they are Trial activation. Commercial activation. Wi-Fi button). Tap the icon with the arrow and enter the activation code to activate
17. How to change the boot animation
18. How to return to the native Android desktop
Settings-Apps-Default apps
Home app-Fanconn by default-select Quickstep
19. What to do if I forget the lock screen password
Restore factory settings via adb
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
20. Checking the number of microphones
cat /proc/asound/cards
21. Common Android system settings properties
# Enable the status bar
adb shell setprop persist.sys.fanc.statusbar.enable 1
# Enable the navigation bar
adb shell setprop persist.sys.fanc.navigationbar.enable 1
# Restart SystemUI to apply the changes
adb shell am restart
# Verify the settings
adb shell getprop persist.sys.fanc.statusbar.enable
22. Forgot password / restore factory settings
- Use an adb command
adb shell am broadcast -a android.intent.action.FACTORY_RESET -n android/com.android.server.MasterClearReceiver
